MSP — 6" Submersible Pump
Majestic Pump's 6-inch submersible pumps move serious water from deep wells — a high-capacity range for heavy agriculture, civil supply and industry, in single & three-phase up to 50 HP at 50 Hz.
MSP 6" Submersible Pump
A high-capacity 6-inch (150 mm) multistage pump for deep wells and big duty. Stainless-steel stage casings and sand-tolerant hydraulics keep it running in tough, silty bores, while a broad model line-up covers a wide head-and-flow map. It pairs with our 6-inch submersible motors for a complete deep-well set.
Overview
The MSP 6" range steps up to deep wells and demanding flows — bulk irrigation, civil water works and industrial supply. Heavy stainless-steel stage casings and abrasion-tolerant impellers stand up to sandy, silty water, and a wide stage range lets you trade head for flow to match the job exactly. Power runs from 3 up to 50 HP, single and three-phase, at 50 Hz — and every pump is sized to pair with our 6-inch submersible motors.
High capacity
Big flow and high head from a single 6-inch frame for deep wells and bulk supply.
Sand-tolerant
Stainless-steel casings and abrasion-resistant stages run on in silty, gritty bores.
Matched to suit
A wide stage range trades head for flow so the pump fits the duty point exactly.
Technical Details
Performance Curves & Data · 50 Hz
Pick a model series to see its head-vs-flow curves and the full selection table. Higher stage counts give more head at the same flow.
Features
- High-capacity 6-inch hydraulics for deep wells
- Stainless-steel stage casings for strength and long life
- Sand- and abrasion-tolerant impellers for silty bores
- Stainless-steel shaft with water-lubricated bearings
- Integral non-return valve prevents back-flow
- NEMA flange coupling to our 6-inch submersible motors
- Wide stage range covering a large head-and-flow map
Applications
Standards & Build
- Tested at 2900 rpm, 50 Hz duty
- Stainless-steel, sand-tolerant stage build
- NEMA-standard motor coupling
- Matched to 6-inch submersible motors
FAQ
What borewell size does the MSP 6" need?
It is a 6-inch (150 mm) pump, so it needs a 150 mm or larger borewell.
Can it handle sandy water?
Yes — stainless-steel casings and abrasion-tolerant stages are built for silty, gritty bores. For very high sand loads, tell us and we'll advise.
How much power do I need?
Models span 3 to 50 HP. Pick by the head and flow your scheme needs from the curves and tables — we'll confirm the right build and motor.
Is a matched motor available?
Yes — the MSP 6" pairs with our 6-inch submersible motors for a complete deep-well set.
Do you supply projects in bulk?
Yes — bulk and container-load supply with export-ready documentation. Contact sales for project pricing.
Get a quote for the MSP 6" Submersible Pump
Share your borewell size, head and flow — we'll confirm the right model, pricing and lead time.
Contact Sales